We fix what's broken, fast, and we don't disappear after the invoice. Emergency dispatch available across Gilmer and the surrounding zip codes.
Call +1-866-805-8548 and describe what your system is doing — the symptoms help us send a tech prepared with the right parts.
You'll get a flat-rate quote before any repair work begins — no guessing what the final bill will look like.
Most repairs are completed same-visit, and we test the system before we leave to confirm it's actually holding.
Leonard HVAC didn't start as a franchise chasing volume. Every technician we send to your door is background-checked, factory-trained, and licensed to work on the systems installed throughout Gilmer, TX.
We're not interested in being the cheapest quote on the page — we're the crew that answers the phone at 2am when your furnace quits in the middle of a cold snap. Licensing and insurance aren't optional line items for us, and we keep that documentation available on request for every job, residential or commercial.
We know which neighborhoods run on older ductwork and which subdivisions were built with newer high-efficiency systems. That local knowledge shapes how we diagnose problems — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Ask around Gilmer and you'll hear the same complaint about a lot of HVAC companies. That's the gap we built Leonard HVAC to close. We'd rather lose a job to a lower bid than win one by cutting corners on the diagnosis, because a customer who trusts us once tends to call us again — and Gilmer is a small enough community that reputation travels fast.
That local context saves time on every call, because we're not starting from zero on basic questions about your neighborhood or your system. We keep parts inventory stocked based on what actually fails most often on Gilmer's housing stock.
Every service below is backed by the same licensing, warranty, and upfront pricing you get on any job we run.
A dead system in the middle of a heat wave or a cold snap isn't just inconvenient — it can be a real safety issue for kids, pets, and older residents. Our Gilmer dispatch team sends the closest available truck first so a technician is diagnosing your system as fast as physically possible.
If a specialty part genuinely does need to be ordered, we'll set up a safe temporary fix and give you a real timeline instead of leaving you guessing.
An aging system that's constantly breaking down usually costs more to keep patching than to replace. We walk Gilmer homeowners through load calculations so the new system is sized correctly for the actual square footage before a single piece of equipment gets ordered.
Most installs in Gilmer are completed in a single day, and we walk you through the new thermostat and any app controls before we leave.
A retail floor, a restaurant kitchen, or an office suite can't run without stable climate control. Our commercial division services light industrial and warehouse ventilation across Gilmer, with service agreements built around your operating hours.
We understand that a commercial call isn't just about comfort, it's about keeping a business open.
A seasonal tune-up catches the kind of wear that turns into a mid-summer no-cool call. Beyond standard tune-ups, we also handle duct cleaning and sealing to stop conditioned air from leaking into attics and crawlspaces for Gilmer households that want more than just temperature control.
A tune-up typically takes under an hour and covers the checkpoints most likely to catch a problem before it becomes a breakdown.
This is the standard every Gilmer technician on our team is held to.
Every repair comes with a workmanship warranty explained in plain terms before we leave.
Emergency dispatch never comes with a hidden surcharge sprung on you after the fact.
If anything feels off after we leave, one call gets a tech back to your Gilmer address.
Catching these signs early usually means a same-day repair instead of an emergency call at the worst possible moment.
Ignoring new noises is one of the fastest ways to turn a small repair into a major one.
If some rooms stay hot or cold no matter what the thermostat says, the system may be struggling to distribute air evenly.
Gradual efficiency loss is easy to miss month to month, but it adds up fast over a season.
Short cycling puts extra wear on the compressor and shortens the system's overall lifespan.
Chemical odors may signal a refrigerant leak, which requires a licensed technician to handle safely.
If you're calling about the same problem every few months, the underlying cause likely hasn't been fully addressed.
No inflated "emergency surcharge" games — the number we quote is the number you pay.
Emergency calls get moved to the front of the line automatically.
We don't consider a job finished until the system is actually performing correctly.
Every technician carries current state licensing and manufacturer training.
You make the final call — we just make sure you have the full picture.
We'll walk you through what's actually available before you decide.
Every review below reflects an actual service call in the Gilmer area.
"Our AC quit on the hottest weekend of the year and they had a tech out within a couple of hours. The pricing was exactly what they quoted over the phone."
"Scheduled a fall tune-up and they caught a cracked part before it became a real problem. You can tell these guys actually know what they're doing."
"Had a full system replacement done and it was the smoothest home project I've had in years. New system is noticeably quieter and our energy bill actually dropped."
"As a property manager, having a company that actually answers after-hours calls is rare. Now our go-to for every property in the portfolio."
"I appreciated that they didn't try to sell me a bigger unit than I needed. Installation crew was in and out in a day and left the space cleaner than they found it."
"Called at 11pm during a heat wave and honestly didn't expect anyone to pick up, let alone show up. Genuinely relieved to have found a crew that answers when it matters."
After thousands of service calls across Gilmer, a handful of causes show up again and again.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Before the coldest stretch of the year, a heating system benefits from a full safety inspection, checking the heat exchanger, ignition system, and airflow to catch any issue that could turn into a no-heat emergency.
Setting a programmable or smart thermostat to a consistent schedule reduces the number of times the system has to work hard to catch up to a big temperature swing. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
Our technicians train across the major residential and commercial equipment lines, so you're not limited to a single brand's service network. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
Here's a look at the kind of experience that shows up at your door.
Over a decade in residential heating and cooling, with a focus on load calculations and full system replacements.
Known for fast, accurate diagnostics on no-heat and no-cool breakdowns.
Works directly with Gilmer property managers to schedule around business hours.
Because our trucks are staged near Gilmer, average arrival windows run faster than what national chains typically offer.
Our policy is simple: you approve the number before we touch the system.
Yes, no-heat and no-cool situations are treated as priority calls regardless of the hour.
Every technician we send is licensed in accordance with Gilmer, TX requirements and carries full liability coverage.
As a general guideline, if a system is past 12-15 years old and facing a costly repair, replacement often makes more financial sense.
Ask your technician about current plan pricing during any service call.
We cover Gilmer and the surrounding communities, including the zip codes listed in our coverage section below.
Property managers and business owners can request a dedicated point of contact for ongoing service.
Yes, we service systems regardless of who originally installed them.
Financing options are available for qualifying replacement installations, and our team can walk you through what's currently offered.
Systems that run harder due to heavy year-round use may benefit from more frequent check-ins.
Beyond basic safety checks, it's best to leave diagnosis to a licensed technician rather than attempting a repair yourself.
Ask about current after-hours rates when you call +1-866-805-8548.
Most standard repairs are completed in under two hours once the technician has diagnosed the issue and you've approved the quote.
For most residential visits, yes, an adult should be present to grant access and approve any quoted work.
Our technicians are familiar with both, which means less time spent figuring out your specific setup and more time actually fixing the problem.
We also work regularly with homeowners associations, property management companies, and multi-unit buildings throughout Gilmer.
A full system replacement is one of the bigger home expenses most people face, and we don't expect everyone to pay it in a single lump sum. If a rebate or local incentive program applies to your Gilmer installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
Coverage extends across Gilmer proper and into the nearby zip codes listed below.
Coverage isn't limited to a single neighborhood or subdivision — our Gilmer dispatch zone stretches across the metro area and into the surrounding suburbs and unincorporated communities.
